Affiliate & Editorial Disclosure: This review contains affiliate links. If you purchase through our links, we may earn a commission at no extra cost to you. We treat all vendor performance assertions as experimental DIY claims. Therefore, we do not guarantee specific electricity bill reductions. The $39 purchase price grants instant access to digital PDF blueprints and video tutorials. Physical hardware components must be purchased separately.
The number one question prospective builders ask before ordering The Energy Revolution System isn’t about Nikola Tesla’s 1894 patent—it’s about the real-world hardware budget: “Once I spend $39 on the digital blueprints, how much more money will I have to spend at the hardware store to actually build the device?”
Because the vendor’s promotional video moves quickly through the assembly process. As a result, first-time visitors can easily miss the difference between the blueprint price ($39) and the raw materials cost. As we detailed in our complete Energy Revolution System review, this offer is a digital instruction package. It includes a 47-page PDF manual and 2 hours of video walkthroughs. It is not a pre-assembled box shipped to your doorstep.
To help you budget accurately before you spend a dime, this Energy Revolution System materials list and cost review breaks down every component category required for the build, compares the small-scale benchtop prototype ($70–$115 in parts) against the expanded build ($140–$210 in parts), and shows you where to source your copper wire and electronics without overpaying at big-box retail stores.
Quick Budget Snapshot: What You Will Spend
- Digital Blueprint & Video Guide: $39.00 (One-time payment; protected by a 60-day ClickBank refund guarantee).
- Small-Scale Prototype Parts (12V Micro-Load Learning Build): ~$70 to $115 at hardware or online electronics suppliers.
- Expanded Scale Setup (With Buffer Battery & Enclosure): ~$140 to $210 depending on local copper pricing and what you already own in your garage.
- Basic Garage Tools Required: Digital multimeter, wire strippers, fine-grit sandpaper, electrical tape, and an optional soldering iron.
Download the Official Energy Revolution System Parts List & Schematics Here
The True Total Cost: $39 Digital Blueprint + Hardware Parts
Before you commit, look at your Total Out-of-Pocket Spend in two separate stages.
- Stage 1: Inspecting the Schematics ($39): Your purchase unlocks the member download portal. Inside, you will find the 47-page PDF guide and full-color wiring schematics. You also get the itemized parts list with exact specifications, such as wire gauges, capacitor ratings, and diode numbers. The step-by-step video series is included as well.
- Stage 2: Sourcing the Physical Parts ($70–$210): Next, take the parts list to a local electronics shop, hardware store, or online retailer. There you buy your copper magnet wire, rotor magnets, and basic circuit components.
We recommend keeping these two stages separate. ClickBank’s 60-Day Money-Back Guarantee backs your $39 purchase. Therefore, you can download the manual today and read the entire shopping list. You can also price out every part locally before buying a single spool of wire.
General Component Categories Needed for the Build
We cannot republish the vendor’s copyrighted measurements word-for-word. However, the manual hides no secret, proprietary, or “unobtainable” parts. Every piece of hardware falls into five standard electrical categories. Any hobbyist can find them online or in town.

1. Enameled Copper Magnet Wire & Coil Form Basics
As shown in the reference spools above, the heart of the Tesla-inspired flat spiral bifilar pancake coil is enameled copper magnet wire. Unlike standard household Romex or thick plastic-jacketed hookup wire, magnet wire is solid copper coated in a very thin, high-temperature polymer or polyurethane varnish.
- Why Enameled Wire Is Mandatory: The thin varnish lets two parallel wires sit tightly together in a flat spiral without short-circuiting. In addition, this layout maximizes the capacitance and voltage difference between adjacent turns. That is the core principle behind Nikola Tesla’s US Patent 512,340.
- Estimated Cost: $18 to $36 total for two 1-pound spools. Wire size typically runs between 18 AWG and 24 AWG, depending on your build scale.
- Crucial Workbench Tip: Clear enamel looks almost identical to bare copper. As a result, beginners often wrap terminal ends around connectors without stripping the varnish. The multimeter then shows zero voltage output. To avoid this, scrape the enamel off the last half-inch of each lead. Use fine-grit sandpaper or a hobby knife before soldering or clamping.
2. Rotor Assembly, Neodymium Magnets & Core Support
The system relies on a moving magnetic field to induce an electromotive force (EMF). The field passes across your stationary bifilar pancake coil. You need two main items for this stage:
- Acrylic or Non-Conductive Coil Form: This is a flat, non-metallic backing plate. Polycarbonate, acrylic, or sealed plywood all work. It holds the spiral winding firmly in place without causing eddy-current drag.
- Permanent Magnets & Low-Friction Bearing Rotor: Small high-grade neodymium (NdFeB) or ceramic permanent magnets mounted symmetrically on a low-friction rotor assembly.
- Estimated Cost: $15 to $30 for a multi-pack of magnets, non-conductive backing board, and a smooth ball-bearing spindle.
3. Capacitors, Bridge Rectifier Diodes & Output Conditioning
A coil generates alternating voltage pulses as magnetic poles pass over the windings. For this reason, you cannot plug a 12V DC fan or USB phone charger directly into raw coil leads. Instead, you need three inexpensive conditioning components:
- High-Speed Rectifier Diodes (Bridge Rectifier): These convert the alternating pulses into one-way direct current (DC). They also stop current from flowing backward out of your storage battery.
- Electrolytic Smoothing Capacitors: Absorbs rapid voltage spikes and smooths the erratic pulses into a steadier DC flow.
- 12V Buffer Battery & Mini DC/USB Buck Converter or Inverter: The battery stores the trickle charge. You can then draw steady power for small emergency loads, such as LED bulbs and phones.
- Estimated Cost: $12 to $25 for diodes, capacitors, terminal blocks, and toggle switches. A new 12V 7Ah sealed lead-acid (SLA) or LiFePO4 buffer battery adds $25 to $55.
4. Basic Garage Tools Required (What You Likely Already Own)
You do not need a machine shop or specialized engineering gear. Before heading to the store, check your garage toolbox for these basics:
- Digital Multimeter ($12–$20 if you don’t own one): It checks continuity across your bifilar windings. It also measures DC voltage output.
- Wire Cutters / Strippers & Needle-Nose Pliers: For trimming leads and securing terminal screws.
- 220-Grit Sandpaper or Utility Blade: For stripping the clear insulating enamel off the copper magnet wire ends.
- Hot Glue Gun or High-Temp Winding Tape: For anchoring each turn of the flat spiral coil onto the backing plate as you wind it.
- Optional Soldering Iron & Rosin-Core Solder: Screw-down terminal blocks work fine on a test bench. However, soldering your diode and capacitor leads gives you more durable, low-resistance joints.
Small-Scale Build (~$70–$115) vs. Expanded Build (Under $210)
The blueprints let you start with a compact benchtop learning model. Alternatively, you can scale up your coil and battery bank for longer emergency runtime. The table below itemizes both budgets using current 2026 retail component prices.
Itemized Hardware Budget Comparison Table
| Component / Item Category | Small-Scale Benchtop Build | Expanded Outage Backup Build | Where to Source Cheaply |
|---|---|---|---|
| Energy Revolution System PDF + Videos | $39 (One-Time) | $39 (One-Time) | Official Vendor Portal |
| Enameled Copper Magnet Wire (2 Spools) | $18 – $24 (0.5 lb – 1 lb spools) | $32 – $45 (Larger AWG spools) | Online Magnet/Wire Suppliers |
| Non-Conductive Coil Form & Base | $5 – $10 (Scrap acrylic/wood) | $15 – $22 (Polycarbonate sheet) | Hardware Store / Home Depot |
| Neodymium Magnets & Rotor Bearing | $14 – $20 | $25 – $35 | Online Magnet Retailers |
| Capacitors, Diodes & Terminal Blocks | $10 – $15 | $18 – $25 | DigiKey, Mouser, or Amazon |
| 12V Buffer Battery & USB/12V Inverter | $20 – $35 (Small 12V SLA/salvaged) | $45 – $65 (12V LiFePO4 + Inverter) | Harbor Freight / Auto Parts Store |
| Weatherproof Plastic Enclosure Box | $5 – $10 (Basic project box) | $12 – $18 (NEMA-style junction box) | Local Electrical Supply |
| Hardware Materials Subtotal | $72 – $114 | $147 – $210 | — |
| Total Project Cost (Guide + Parts) | $111 – $153 | $186 – $249 | — |
Even the expanded build with all-new components stays under $250 in total. By comparison, commercial DIY solar kits and portable power stations start at $350 to $1,000+.
Click Here to Unlock the Full Itemized Parts List & Video Walkthroughs
Where to Source Parts Cheaply Without Overpaying
If you walk into a retail big-box store and buy individual blister-packed electronics components at full retail markup, you can easily overspend by 40%. Use these three sourcing strategies to keep your build at the bottom end of the budget range:
- Buy Magnet Wire by the Spool Online, Not by the Foot Locally: Local hardware stores rarely carry true enameled copper magnet wire. They usually stock thick, PVC-insulated stranded wire. Unfortunately, that makes a bulky, inefficient pancake coil. Instead, order 1-pound spools of NEMA MW-80-C or MW-35-C enameled copper wire. Specialty magnetics suppliers and online marketplaces sell it for roughly $16 to $18 per pound.
- Salvage Your Coil Backing, Wire Leads & 12V Buffer Battery: An old acrylic cutting board works well as a coil form. So does scrap 1/4-inch plexiglass or sealed marine plywood. They perform just as well as a $20 sheet of virgin polycarbonate. Similarly, a working 12V battery from an old computer UPS or lawn tractor can shave $35 off your parts bill.
- Skip Specialty Brand-Name Enclosures: A sturdy plastic storage bin works fine. So does a standard PVC junction box from the electrical aisle at Home Depot or Lowe’s. Either one costs under $12. Moreover, it keeps low-voltage terminals safely away from pets and children.
Final Verdict: Is the Total Build Cost Worth It?
When you add the $39 digital blueprint to a realistic $75–$140 hardware store run, The Energy Revolution System costs roughly $115 to $180 all-in to put a working electromagnetic micro-power project on your workbench.
As we emphasize in our main Energy Revolution System review, a $150 homemade coil setup will not replace your utility company. Likewise, it will not power the air conditioning in a 3,000-square-foot home. Its realistic purpose is much smaller. You build a quiet, indoor-safe 12V trickle power station for emergency LED lighting and phone charging. You also apply the manual’s household phantom-load reduction strategies. Used this way, it is one of the most educational and budget-friendly weekend energy projects available.
Best of all, you don’t have to guess whether the parts list fits your local store inventory. Download the $39 blueprint today and inspect the exact component specs and schematics. Then take a full 60 days to decide whether you want to build it. If not, request a 100% refund through ClickBank with zero hassle. Get Instant Access to The Energy Revolution System Blueprints & Parts List (60-Day Guarantee)




